How To Use An Rd-03D mmwave Sensor To Create A Human Radar

🔗 *The full guide* : _https://core-electronics.com.au/guides/arduino/detect-and-track-humans-with-mmwave-radar-on-an-arduino/_

In this guide, we will be learning how to *detect and track humans* using an *Rd-03D mmwave radar* sensor with an *Arduino*. We are going to look at how the sensor works and what you can expect from it, how to wire up and program the Arduino, as well as how to create a *visual radar display* with *processing IDE*.

🔧🔨🧰 Hardware featured in this guide:

*Rd-03D sensor:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10172_
*Rd-03D cable:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10219_
*Arduinos:*
_https://core-electronics.com.au/arduino.html#category_638_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 How the Sensor Works
2:36 What You Will Need
3:08 Wiring The Arduino and Sensor
5:09 Using the Radar Library
9:04 Some Usage Tips
10:04 Radar Visualisation with Processing IDE

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo